Flash recovery vessels are used in all steam plants to recover flash steam, which may otherwise get wasted through the condensate receiver vent pipe. Steam flash recovered can be utilized for executing any low pressure processes or heating equipment. Manufactured with a complete stainless steel body, these vessels withstand the rough conditions exist in boiler blow down heat recovery environments.

Tips on Installation

ASME coded Flash recovery vessels and stamped vessels, need to be installed with appropriate knowledge as improper installation poses a threat to both property and life.

The below points provide information to accomplish a proper and safe
flash recovery vessel installation.

• Prior to installation, check the pressure/temperature ratings.
• Remove plastic covers placed on flanges or connection ends if any.
• Install the inlets/outlets of the vessel on the right flow direction.
• Install the vessel in a vertical position. The position of the vessel should be such that the flash steam outlet is at the top.

External stress can affect the operation of these vessels. Hence, ensure that the product is unaffected even in adverse industrial or environmental conditions.

Tips on Maintenance

As with any other mechanical equipment, flash recovery systems must also be maintained on a proper note. Timely maintenance increases the equipment’s productivity along with extending its service life. Here are some tips on maintaining your flash recovery vessels.

• Although your flash recovery systems require no specific type of maintenance, it is recommended to inspect the parts on a regular basis. However, make sure that the equipment or its parts are not hot or pressurized when conducting the maintenance activities.
• Regular contact with poor quality water or corrosive fluids may lead to corrosion. Ensure to follow the maintenance instructions provided by manufacturers stringently to avoid rusting of parts.
• Conduct wall thickness examinations regularly. In case you find variations in the vessel’s wall thickness, get the system checked and repaired by a reliable technician.

Follow Installation and Maintenance Procedures Strictly

Following the aforementioned tips helps in preventing any kind of unforeseen system break down, which may lead to costly downtime. Also, proper installation and timely maintenance can help you prevent dangerous overpressure, over temperature, or even vacuum conditions. Communicating with your manufacturer also gives you information on proper installation procedures and inevitable maintenance measures.